716-893-5377 | EMAIL
The South Beach Frame: Now Available from Handley Industries and your local stained glass retailer

HOME ORDER FAQ IDEAS CONTACT PATTERN BOOK HANDLEY INDUSTRIES
 
TELL ME MORE ABOUT IT
 The South Beach Frame is made using high quality solid steel and is available in five different finishes: Antique Brass, Antique Copper, Black, Nickel and Pewter.  It ships in a unique protective corrugated box and, depending on the model ordered, may also include the acrylic wall mounting plate and electrical kit.  A candelabra-type light bulb is recommended for this installation.  The frame is also available without the wall mounting plate and electrical kit for installations where electrical is not required.
 

HOW EASY IS IT TO HANG ON MY WALL?
 The South Beach Frame is an innovative fixture that enables crafters to easily mount and illuminate their art glass on any wall.  Just use three #12 screws and plastic anchors to attach the acrylic mounting plate to the wall, then snap in the pre-wired bulb socket into the mounting plate and plug it into a standard electrical outlet.

The final step is even easier!  Simply slide your art glass panel down into the slot.  That's it!  Your art glass wall sculpture is now professionally displayed.

You can also attach the frame directly to the wall without using the acrylic plate.  The support bar is pre-drilled with three holes for direct screw mounting.
 

CAN I PUT IT ON A TABLE?
The South Beach Frame can also be mounted as a tabletop display.  An optional acrylic stand is available with pre-drilled holes for the acrylic wall mounting plate and electrical kit.  The stand also has a larger hole to allow the cord and plug to pass through.  This photo shows how the frame is hung on the mounting plate.  No tools are required; the frame is supported by a flange on the back of the mounting plate.
 

WHAT ARE THE DIMENSIONS?
The overall width of the frame is 11-7/8" (30cm) across the top spread of the "v" with a 10-1/4" (27cm) vertical height.  The depth of the frame itself is 3" (7.5cm), however the mounted panel would be 2-1/16" (5cm) from the back.

The slot in the frame is 7/16" (11mm) wide and 8" (20cm) long, and will accommodate a panel up to 10-1/2" (27cm) in diameter.  Although a circle is a natural match for this frame, most geometric shapes will work perfectly, as will many freeform shapes.